A Few Helpful Hints For Performing DIY Garage Door Repair

Having a professional come and perform garage door repair can be quite expensive and time-consuming. In order to avoid additional bills such as these, the following article is compiled of a few steps for making minor repairs. Additionally performing proper maintenance on the hardware will help to prevent future problems from occurring.

The first thing to look at when an assembly is not opening and closing correctly is the track system which is the set of rails the enclosure moves on. The metal guides are secured to the wall and also to the overhead rafters. The overhead pieces are generally set at a slight downward angle where the wall mount guides are flush.

Check the rails to make sure they are properly secured and not lose, if they are loose they can cause the guides to become misaligned. Next check overhead door repair to see if the rails are damaged in any way such as bent areas, if there are bent areas take a mallet and pound them straight again. If there are no damaged areas and the screws are all tight, a check to make sure the rails are level is the next course of action.

When repairs have been made take some cleaner and remove any dirt and debris from the runners to ensure the wheels will roll smoothly. Once everything is cleaned, take some lubricant that is designed for this assembly and apply it evenly to both sides. This will provide the lubrication the wheels require to successfully traverse the tracks during opening and closing operations.

Another part to inspect are the rollers that are attached to the hinges, these are the designed to guide the enclosure up and down the tracks. If one of the rollers is broken or worn out it can cause the whole assembly to not open or close correctly. While checking the rollers, examine the hinges as well and make sure they are securely fastened.

The springs also need to be examined and if the tension is not tight enough the spring can be adjusted manually. A few different types of springs are used, if the spring system has a spring cable and pulley design the string will need to be pulled out further and re-tied to provide more tension. If the spring is located in the center of the opening and is the only spring for the whole unit then a professional should be called in to adjust it.

Performing proper maintenance will not only save money in the future it will also provide added peace of mind for a job well done. Maintenance includes checking all the hardware at least once every other month to ensure everything is still tight. Also regularly cleaning tracks of debris along with making sure they and the rollers are properly lubricated will help to make sure the assembly continues working for many years to come.

Garage door repair is one of the easiest projects that can be performed by a homeowner. The important thing to remember is safety first and foremost. By practicing safety the project will go smoothly and be completed the first time out.

Leave a Reply

Your email address will not be published. Required fields are marked *